Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #10

Edição por Nick Sherman

Edição aprovada de Nick Sherman

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Check that the single input plug from the logic board to the screen is completely pushed inin by pressing it firmly into the socket.
[* blackblue] Also check that the 2 output plugs from the screen to the logic board are completely pushed inin by pressing them firmly into the sockets.
[* black] Now youicon_note] You have successfully reconnected your display screen.
[* black] Check that the single input plug from the logic board to the screen is completely pushed inin by pressing it firmly into the socket.
[* blackblue] Also check that the 2 output plugs from the screen to the logic board are completely pushed inin by pressing them firmly into the sockets.
[* black] Now youicon_note] You have successfully reconnected your display screen.

Imagem 1

Versão Antiga

Nova Versão