Alterações no passo #4
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* icon_note] Rotate the mini so that the SuperDrive slot loading mechanism is facing you. |
| [* black] Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board. |
| [* icon_caution] Use tweezers to grab the connector (as seen in the picture), '''not the wires'''. |
| [* icon_note] The connector is located under the optical drive opening, next to the PRAM battery. |