Pular para o conteúdo principal

Alterações no passo #2

Edição por Dante Bozzini

Edição aprovada por Dante Bozzini

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Hold the seat firmly, and pull up and out on the seat to remove it from the frame.
[* black] Remove the seat from the frame by pulling up on the bottom of the seat. Your seat should now be entirely separate from the frame.
[* black] Fit the shaft of the seat into the frame, slide it in until the seat is at a height that you can sit at comfortably. tighten the seat clamp by rotating it clockwise if you are on the right side of the bike. Once your seat is locked in you are ready to ride.