Pular para o conteúdo principal

Alterações no passo #1

Edição por Alyssa Compania

Edição aprovada por Alyssa Compania

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Fit the shaft of the seat into the frame, slidslide it in until the seat is at a height that you can sit atat comfortably.
[* black] While holding the seat at roughly the same heightstable, tighten the seat clamp by rotating it clockwiseclockwise if you are on the right side of the bike. Once your seat is locked in you are ready to ride.
[* black] Fit the shaft of the seat into the frame, slidslide it in until the seat is at a height that you can sit atat comfortably.
[* black] While holding the seat at roughly the same heightstable, tighten the seat clamp by rotating it clockwiseclockwise if you are on the right side of the bike. Once your seat is locked in you are ready to ride.
[* black] I will add three pictures; one picturing the seat stand fitting into the frame, one picturing the seat being tightened, and one picturing the successfully added seat.