Skip to main content

Alterações no passo #1

Edição por Aaron Correya

Edição aprovada by Aaron Correya

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Ensure the engine is off and cooled down before starting this guide.
[* redblack] Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.
[* redblack] Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.
[* black] Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.