Ir para o conteúdo principal

Alterações no passo #2

Edição por Ryan McMullen

Edição aprovada de Ryan McMullen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Turn computer to the top so that the hingehinged side is facingfacing up.
[* black] Use the spludgerplastic opening tool to pry open this top partthe back plate.
[* blackred] Drag the spludgerplastic opening tool along the edge from left to right and use a second oneopening tool to help pry open the top right corner.
[* orange] Repeat the 3rd step for the other side.
[* icon_note]
You should be able to hear a pop.
[* black] Run first spludger along edge to the opposite side and use the second spludger to
pop when prying open the top left cornercorners.
[* black] Turn computer to the top so that the hingehinged side is facingfacing up.
[* black] Use the spludgerplastic opening tool to pry open this top partthe back plate.
[* blackred] Drag the spludgerplastic opening tool along the edge from left to right and use a second oneopening tool to help pry open the top right corner.
[* orange] Repeat the 3rd step for the other side.
[* icon_note]
You should be able to hear a pop.
[* black] Run first spludger along edge to the opposite side and use the second spludger to
pop when prying open the top left cornercorners.

Imagem 1

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão