Ir para o conteúdo principal

Alterações neste passo

Edição por Erin Schoch

Edição aprovada por Erin Schoch

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Slide the flat end of the spudger along the seam of the case until the outer case fully separates. Holding the spudger at a slight angle will help to gently release the case.
-[* icon_note] The case dismantles in two pieces (one on the top and one on the bottom). The order of removal is not important, however you will need to repeat these three steps in order to remove both pieces.
+[* black] Slide the flat end of the spudger along the seam of the case until one side fully separates.
+[* black] ***Repeat these three steps to remove the other side***.
+[* icon_note] Holding the spudger at a slight angle will help to gently release the case.