Ir para o conteúdo principal

Alterações no passo #6

Edição por Walter Galan

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove four T10 Torx screws securing the power supply to the rear case.
+[* icon_note] The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.
+[* black] Lift the power supply out of the rear case, minding the AC-in cable that may get caught.
+[* icon_caution] Do not touch the face of the power supply board to avoid electric shock.