Pular para o conteúdo principal

Alterações no passo #4

Edição por Peter Murray

Edição aprovada por David Hodson

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] With a gentle pull on the bottom of the inside of the radio itradio, the main unit should come out with(with a little resitance it has an o ring gasketresistance). Take care not to damage the O-ring gasket that surrounds this opening and protects the main unit.
[* icon_caution] As with anytime you may want to take static cautionshandle electronics, you should observe standard electrostatic precautions when handling the internals.
[* black] pivotPivot and move the internalsmain unit out till you can pullof the front cover at the bottom until the antenna studconnector and channeltuning knob stud down and outare clear of the housing.
[* black] With a gentle pull on the bottom of the inside of the radio itradio, the main unit should come out with(with a little resitance it has an o ring gasketresistance). Take care not to damage the O-ring gasket that surrounds this opening and protects the main unit.
[* icon_caution] As with anytime you may want to take static cautionshandle electronics, you should observe standard electrostatic precautions when handling the internals.
[* black] pivotPivot and move the internalsmain unit out till you can pullof the front cover at the bottom until the antenna studconnector and channeltuning knob stud down and outare clear of the housing.