Ir para o conteúdo principal

Alterações no passo #11

Edição por Ben Buell

Edição aprovada de Ben Buell

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Get the replacement filter and lightly spread clean engine oil onto the rubber gasket of the new filter.
[* black] Thread the new filter into the oil filter port by turning the filter clockwise.
[* black] Once the rubber gasket contacts the engine block, use the channel locks to turn the filter one full turn CW.
[* icon_note] Over tightening may cause the gasket to break and leak oil.