Ir para o conteúdo principal

Alterações no passo #6

Edição por Walter Galan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Remove the single T10 Torx screw securing the right speaker to the logic board.
[* black] Lift the right speaker out of the rear case and move it out of the way.
[* icon_caution] Both speakers are still attached to the logic boardboard by the speaker cable.
[* icon_caution] Both speakers are still attached to the logic boardboard by the speaker cable.