Ir para o conteúdo principal

Alterações no passo #1

Edição por Erin Schoch

Edição aprovada por Erin Schoch

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Using the plastic spudger, slide one corner of the flat end of the spudger into one of the notches. There are two notches, one for each side of the case. We'll take off the top part of the case first.
+[* black] Using the flat end of the plastic spudger, slide the tip of one corner into the upper of the two notches. This will allow you to remove the top portion of the case. The case dismantles in two pieces. The order of removal is not important, so you could also begin by removing the bottom portion.