Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Peel the adhesive offbacking off of the adhesive back of the small temperature probesensor board.
[* black] AttachAdhere the temperature probesensor board onto ato an exposed, metal surface area of the surface of the SSD, as close as possible to the connectorSATA ports.
[* black] Fold the excess temperature probesensor wires so that they are out of the wayway while you install the enclosure.
[* black] Peel the adhesive offbacking off of the adhesive back of the small temperature probesensor board.
[* black] AttachAdhere the temperature probesensor board onto ato an exposed, metal surface area of the surface of the SSD, as close as possible to the connectorSATA ports.
[* black] Fold the excess temperature probesensor wires so that they are out of the wayway while you install the enclosure.