Pular para o conteúdo principal

Alterações no passo #10

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Trace the two-wire black-white temperature cable you disconnected from the old hard drive. It should end at a socket on the motherboard.
[* black] Trace the two-wire black-white temperature cable you disconnected from the old hard drive. It should end at a socket on the motherboard.
[* black] Note which side of the socket connects to the black wire.
[* black] Disconnect and remove the old temperature cable. You will no longer need it.
[* black] Connect the two-wire red-black temperature cable to the same motherboard connector, matching black wire sides. Route the cable out of the way.