Pular para o conteúdo principal

Alterações no passo #10

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Trace the two-wire temperature cable you disconnected from the old hard drive. It should end at a socketplug on the motherboard labeled '''HD TMP''' or '''HDD TEMP'''.
[* black] If there is an existing two-wirethe previous temperature cable inis still connected to the socketplug, disconnect and remove the old temperature cable. Youit. You will no longer need it.
[* black] Connect the two-wire red-black temperature cable coming from the temperature probe to the same motherboard connectorplug.
[* black] Trace the two-wire temperature cable you disconnected from the old hard drive. It should end at a socketplug on the motherboard labeled '''HD TMP''' or '''HDD TEMP'''.
[* black] If there is an existing two-wirethe previous temperature cable inis still connected to the socketplug, disconnect and remove the old temperature cable. Youit. You will no longer need it.
[* black] Connect the two-wire red-black temperature cable coming from the temperature probe to the same motherboard connectorplug.
[* icon_note] The connector is keyed to fit in one way only. If it seems like the connector is not fitting the socket, flip the connector and try again.
[* black] Route the excess wire out of the way.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado