Pular para o conteúdo principal

Alterações no passo #5

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Peel the backing off of the adhesive back of the small temperature sensor board.
[* black] Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA portsconnector.
[* black] Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA portsconnector.
[* black] Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.