Pular para o conteúdo principal

Alterações no passo #2

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Line up the small SATA connector soconnectors so that the short side of the connector on the SSD matches the short side on the enclosure.
[* black] Line up the small SATA connector soconnectors so that the short side of the connector on the SSD matches the short side on the enclosure.
[* black] Slide the drive in through the front of the enclosure until the SATA connector is fully seated.
[* icon_note] The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.