Pular para o conteúdo principal

Alterações no passo #2

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] SlideLine up the small SATA connector so that the short side on the SSD intomatches the short side on the enclosure.
[* black] Slide the drive in through the front of
the enclosure until the SSD's power and data ports connect with the enclosure'sSATA connector is fully seated.
[* icon_note] The SSD's ports connect withSSD connects with the enclosure in only one way. If the portsconnectors are not lining up, rotate the SSD and try again.
[* black] SlideLine up the small SATA connector so that the short side on the SSD intomatches the short side on the enclosure.
[* black] Slide the drive in through the front of
the enclosure until the SSD's power and data ports connect with the enclosure'sSATA connector is fully seated.
[* icon_note] The SSD's ports connect withSSD connects with the enclosure in only one way. If the portsconnectors are not lining up, rotate the SSD and try again.