Ir para o conteúdo principal

Alterações no passo #2

Edição por Justin Ogihara

Edição aprovada por Justin Ogihara

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Locate the PH00 head screw at the top of the landing leg and unscrew it. The length of the screws are 16.9 mm.
+[* red] Unscrew the 16.9 mm screw at the top of the landing leg with a Phillips #00 screwdriver.
[* icon_caution] Make sure the screw head is ++not++ stripped in the process.
[* black] If stripped, the whole leg, including the internal sensors, will need to be replaced.
- [* icon_reminder] Make sure to keep the screw.