Ir para o conteúdo principal

Alterações no passo #2

Edição por Shasta Banchio

Edição aprovada por Shasta Banchio

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Locate the J000 head screw at the top of the landing leg and unscrew it.
+[* red] Locate the J000 head screw at the top of the landing leg and unscrew it.
[* icon_caution] Make sure the screw head is ++not++ stripped in the process.
- [* black] If stripped, the whole leg, including the internal sensors, will need to be replaced.
+ [* black] If stripped, the whole leg, including the internal sensors, will need to be replaced.
[* icon_reminder] Make sure to keep the screw.