Pular para o conteúdo principal

Alterações no passo #18

Edição por David Rans

Edição aprovada por David Rans

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Slide the opening pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.
[* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.
[* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.
[* icon_reminder] If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in [guide|10808|step 9|stepid=388298|stepid=38829].
[* icon_reminder] If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in [guide|10808|step 9|stepid=388298|stepid=38829].