Pular para o conteúdo principal

Alterações no passo #18

Edição por Ed Chapman

Edição recusada por Jake Devincenzi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Slide the guitar pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.
[* black] If your iPad has GSM, work along the top edge in the same manner as avoiding the bluetooth / wi-fi antenna along the bottom.
[* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.
[* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.
[* icon_reminder] If the guitar pick is getting stuck in the adhesive, "roll" the guitar pick as shown in [guide|10808|step 9|stepid=38829].