Pular para o conteúdo principal

Alterações no passo #13

Edição por Walter Galan

Edição aprovada por Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackicon_caution] This step requires you to move the guitar pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.
[* icon_note
] Do not completely remove the guitar pick from under the front glass, but pull it out just a litttle bit so that ~1/8" of the tip is still under the front glass.
[* blackicon_caution] This step requires you to move the guitar pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.
[* icon_note
] Do not completely remove the guitar pick from under the front glass, but pull it out just a litttle bit so that ~1/8" of the tip is still under the front glass.
[* black] Slide the tip of the guitar pick along the bottom edge of the iPad, releasing the adhesive underneath the Wi-Fi antenna.