Pular para o conteúdo principal

Alterações no passo #8

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.
[* black] Slide the guitaropening pick down along the edge of the iPad, releasing the adhesive as you go.
[* black] Slide the guitaropening pick down along the edge of the iPad, releasing the adhesive as you go.
[* icon_caution] The adhesive is very strong, and some serious force may be required. Work carefully.
[* icon_note] If you can see the tip of the guitaropening pick underneath the front glass, pull the guitar pick out just a little bit. While using the guitaropening pick this deep won't damage anything, it may get adhesive residue all over the LCD.
[* icon_note] If you can see the tip of the guitaropening pick underneath the front glass, pull the guitar pick out just a little bit. While using the guitaropening pick this deep won't damage anything, it may get adhesive residue all over the LCD.