Alterações no passo #4
Linhas de Passo
| [* black] Use the tip or the flat end of a spudger to unlock the connector securing the flat cable of the keyboard to the logic board. |
| [* black] Pull the flat cable out not up. |
| [* black] When re-assembling, insert and hold the flat cable in place with one hand; use the other hand to lock the connecter using the tip or flat end of a spudger. If you release the flat cable before locking the connector, it will most probably slip out. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado