Skip to main content

Alterações no passo #1

Edição por Marty Rippens

Edição aprovada by Marty Rippens

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Place the laptop face down on a flat, clean surface.
[* red] Locate and remove all 27twenty-seven 7 mm screws on the back cover of the laptop with a Phillips Head #0 screwdriver. Screws are circled in red on the diagram.
[* red] Locate and remove all 27twenty-seven 7 mm screws on the back cover of the laptop with a Phillips Head #0 screwdriver. Screws are circled in red on the diagram.