Skip to main content

Alterações no passo #7

Edição por Trevor Aspinall

Edição aprovada by Trevor Aspinall

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Pull the circuit board out of the containment box.
[* red] Locate the power cable connection point on the circuit board.
[* yellow] Desolder the power cable wires connected to the board.
[* icon_caution] Solder iron can cause burns if used improperly.
[*
blue] ReplaceNew line.Replace the power cable with the corresponding wires of the new power cable.
[* icon_caution] Solder iron can cause burns if used improperly.
[*
blue] ReplaceNew line.Replace the power cable with the corresponding wires of the new power cable.