Skip to main content

Alterações no passo #7

Edição por Andrew Klatt

Edição aprovada by Andrew Klatt

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Locate the wires connected topower cable connection point on the circuit board.
[* black] Desolder the power cable wires connected to the board.
[* black] Replace the wirespower cable with the corresponding wires of the new power cordcable.
[* black] Locate the wires connected topower cable connection point on the circuit board.
[* black] Desolder the power cable wires connected to the board.
[* black] Replace the wirespower cable with the corresponding wires of the new power cordcable.