Skip to main content

Alterações no passo #4

Edição por Marty Rippens

Edição aprovada by Marty Rippens

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the phillipsPhillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a phillipsPhillips head screwdriver.
[* red] Locate the phillipsPhillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a phillipsPhillips head screwdriver.
[* black] Carefully slide the shield out of place along the power cord and set it aside.