Ir para o conteúdo principal

Alterações no passo #4

Edição por Andrew Klatt

Edição aprovada de Andrew Klatt

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the Philipsphillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a Philipsphillips head screwdriver.
[* black] Carefully slide the shield out of place along the power chord. Andcord and set it aside.
[* red] Locate the Philipsphillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a Philipsphillips head screwdriver.
[* black] Carefully slide the shield out of place along the power chord. Andcord and set it aside.