Ir para o conteúdo principal

Alterações no passo #2

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the following screws from the metal bracket between the rear facing flash and camera windows:
[* red] Single 2.9 mm standoff screw
[* icon_note] TheseWhile these screws have a Phillips bit pattern, but we found the best tool to be a 2.5 mm flathead driver works bestdriver.
[* icon_note] TheseWhile these screws have a Phillips bit pattern, but we found the best tool to be a 2.5 mm flathead driver works bestdriver.
[* orange] Single 1.6 mm Phillips screw