Skip to main content

Alterações no passo #3

Edição por Blake Klein

Edição aprovada by Blake Klein

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Using a metal spudger, gowork your way around the edges betweenperimeter of the main board and screen.
[* black] Using a metal spudger, gowork your way around the edges betweenperimeter of the main board and screen.
[* icon_note] There is a lot of adhesive between the two pieces, so be careful to try to remove the adhesive slowly in order to not break anything.
[* icon_note] If there seems to be too much adhesive. The adhesive's effect can be lessened by applying heat. This can be done by a blow dryer.