Alterações no passo #1

Edição por Addison Thomas

Edição aprovada por Addison Thomas

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The pictures shown are taken with the motherboard removed. This is not required for the replacement of the USB module.
[* red] RemoveUsing the Phillips Screwdriver #00, remove the 2 2.8mm Phillips screws that hold the USB module to the assembly.
[* red] RemoveUsing the Phillips Screwdriver #00, remove the 2 2.8mm Phillips screws that hold the USB module to the assembly.
[* orange] Carefully remove the ribbon cable from the module by lifting up on the latch and pulling the cable out.
[* black] Replace the USB module at this time.