Skip to main content

Alterações neste passo

Edição por gdubai

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the strip of tape holding the thermal sensor cable to the hard drive and remove the thermal sensor from the hard drive.
[* icon_reminder] You'll want to transfer this thermal sensor to the same position on your new hard drive. You will probably find that it is much easier to reconnect the thermal sensor cable to its socket if you do so '''before''' you attach the sensor board to the new hard drive.
[* icon_reminder] You'll want to transfer this thermal sensor to the same position on your new hard drive. You will probably find that it is much easier to reconnect the thermal sensor cable to its socket if you do so '''before''' you attach the sensor board to the new hard drive.