Ir para o conteúdo principal

Alterações neste passo

Edição por eckndu

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] In this step, make sure to only disconnect the connector from its socket, and not the entire socket from the interconnect board.
[* black] Use the tip of a spudger to gently pry the hard drive thermal sensor connector away from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board.
[* black] This step is NOT NECESSARY. It may damage the connector, and can be avoided easily: Simply follow step 18 to remove the other end of thermal sensor.