Ir para o conteúdo principal

Alterações neste passo

Edição por Marcus Bointon

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] In this step, make sure to only disconnect the'''This step is optional''' We suggest you ''don't'' remove this connector from its socket,at all as it's tiny and notextremely fragile, but instead remove the entire socket fromthermal sensor at the interconnect boardother end of the cable, as described in later steps.
[* black] UseShould you want to do this, use the tip of a spudger to gently pry the hard drive thermal sensor connector away from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board. Note that the connector releases upward, perpendicular to the board, not in the direction of the cable.
[* icon_caution] In this step, make sure to only disconnect the'''This step is optional''' We suggest you ''don't'' remove this connector from its socket,at all as it's tiny and notextremely fragile, but instead remove the entire socket fromthermal sensor at the interconnect boardother end of the cable, as described in later steps.
[* black] UseShould you want to do this, use the tip of a spudger to gently pry the hard drive thermal sensor connector away from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board. Note that the connector releases upward, perpendicular to the board, not in the direction of the cable.