Ir para o conteúdo principal

Alterações neste passo

Edição por Miroslav Djuric

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] In this step, make sure to only disconnect the connector from its socket, and not the entire socket from the interconnect board.
[*
black] Use the tip of a spudger to gently pry the hard drive thermal sensor connector up offaway from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board.
[* icon_caution] In this step, make sure to only disconnect the connector from its socket, and not the entire socket from the interconnect board.
[*
black] Use the tip of a spudger to gently pry the hard drive thermal sensor connector up offaway from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado