Ir para o conteúdo principal

Alterações no passo #1

Edição por Kristen Gismondi

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Using the PH #00 screwdriver, loosen and removeRemove the four 3.8 mm3.8mm Phillips #00 screws holding the device together. After loosening a screw, it should be removable by using your fingers.
[* red] Using the PH #00 screwdriver, loosen and removeRemove the four 3.8 mm3.8mm Phillips #00 screws holding the device together. After loosening a screw, it should be removable by using your fingers.