Alterações no passo nº 2
Edição por Valeria Cortez —
Edição aprovada por Valeria Cortez
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel. | |
| - | [* black] Slowly pry the front panel by sliding the Metal Spudger underneath the top left corner. |
| - | [* black] Once the top corner is lifted up move to the bottom left corner. Slowly pry the bottom. |
| - | [* black] Repeat this prying process to the right top and left corner of the panel. |
| + | [* black] Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel. |