Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Kelly Johnston

Edição aprovada por Kelly Johnston

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] Before starting this guide, please ensure your device is turned off and unplugged to avoid damaging the electronics.
[* black] Turn laptop over.
[* red] Unscrew the 12 Phillips07.mm Phillips #0 screws (total of 12 screws) from the back cover of the device.
[* red] Unscrew the 12 Phillips07.mm Phillips #0 screws (total of 12 screws) from the back cover of the device.
[* black] Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. Once the back cover is fully disconnected from the device, lift the cover off and set aside.