Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Blake Klein

Edição aprovada por Blake Klein

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] Before starting this guide, please ensure your device is turned offblack] Disconnect all power from the laptop and unplugged to avoid damagingturn over so the electronics.
[* black] Turn laptop over
bottom is facing you.
[* red] Remove the twelve 07.mm Phillips #0 screws (total of 12 screws) from the back cover of the devicecover.
[* black] Using the spudger, gently pry the back cover off of the device. There are severalWork a plastic snaps located on the inside of the cover - run the spudgeropening tool underneath and around the perimeter of the cover to open each snap.bottom cover.
[* black]
Once unclipped, remove the back cover is fully disconnected from the device, lift the cover off and set asidebottom cover.
[* icon_caution] Before starting this guide, please ensure your device is turned offblack] Disconnect all power from the laptop and unplugged to avoid damagingturn over so the electronics.
[* black] Turn laptop over
bottom is facing you.
[* red] Remove the twelve 07.mm Phillips #0 screws (total of 12 screws) from the back cover of the devicecover.
[* black] Using the spudger, gently pry the back cover off of the device. There are severalWork a plastic snaps located on the inside of the cover - run the spudgeropening tool underneath and around the perimeter of the cover to open each snap.bottom cover.
[* black]
Once unclipped, remove the back cover is fully disconnected from the device, lift the cover off and set asidebottom cover.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Excluído