Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Kelly Johnston

Edição aprovada por Kelly Johnston

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] Before starting this guide, please ensure your device is turned off and unplugged to avoid damaging the electronics.
[*
black] Turn laptop overover.
[* red] Unscrew the 12 Phillips #0 screws from the back cover of the device.
[* black] Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. Once the back cover is fully disconnected from the device, lift the cover off and set aside.
[* icon_caution] Before starting this guide, please ensure your device is turned off and unplugged to avoid damaging the electronics.
[*
black] Turn laptop overover.
[* red] Unscrew the 12 Phillips #0 screws from the back cover of the device.
[* black] Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. Once the back cover is fully disconnected from the device, lift the cover off and set aside.

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado