Pular para o conteúdo principal

Alterações no passo #3

Edição por Connor Woitte

Edição aprovada por Connor Woitte

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] UnscrewRemove the four screws, and replace.unsolder all cords on the circuit board
[* icon_note] '''Note''' There will be 4x 4mm Phillips head screws
[* icon_note] '''Note''' It is important to keep track of where the leads came from. Red/Blue and Black/White pairings belong to motors, whereas Black/Red pairings belong to lights. The ports are labeled on the board
[* black] UnscrewRemove the four screws, and replace.unsolder all cords on the circuit board
[* icon_note] '''Note''' There will be 4x 4mm Phillips head screws
[* icon_note] '''Note''' It is important to keep track of where the leads came from. Red/Blue and Black/White pairings belong to motors, whereas Black/Red pairings belong to lights. The ports are labeled on the board