Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Brett Hartt

Edição aprovada por Brett Hartt

Antes
Depois
Sem alteração

Linhas de Passo

[* black] The vertical structures seen in these cross-sections of the A6 are the contacts between layers.
[*
black] The raised mesa-looking shapes are the transistors' structures, and the little pegs running between them are the contacts are actually the transistors' structurescontacts.
[* black] The vertical structures seen in these cross-sections of the A6 are the contacts between layers.
[*
black] The raised mesa-looking shapes are the transistors' structures, and the little pegs running between them are the contacts are actually the transistors' structurescontacts.
[* red] This very thin line confirms that this is the 32nm HKMG (Hi-K metal gate) process.
[* black] The A6's 32 HKmg process is the same as used in Apple TV (APL2498 on Chipworks).
[* black] In a [http://en.wikipedia.org/wiki/FET|FET (Field Effect Transistor)], K is a physical parameter of the device that depends on the doping levels of the silicon and the size of the transistor. The gate is the control pin on an FET.