Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #10

Edição por Luke

Edição aprovada de Luke

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Top Case
[* black] Insert wisdom hereRotate the feet to the up position.
[* black] Using a T-8 torx driver, remove the screw located under each foot.
[* black] Remove the four screws at the front edge of the bottom case
[* black] Remove the remaining screw on the inside top edge of the case.
[* black] Carefully lift and rotate the top case toward you and disconnect the track pad cable from the motherboard.
[* black] Remove the interconnect to logic board cable from the opening for the right clutch.
[* black] Remove the top case
.
[* black] Insert wisdom hereRotate the feet to the up position.
[* black] Using a T-8 torx driver, remove the screw located under each foot.
[* black] Remove the four screws at the front edge of the bottom case
[* black] Remove the remaining screw on the inside top edge of the case.
[* black] Carefully lift and rotate the top case toward you and disconnect the track pad cable from the motherboard.
[* black] Remove the interconnect to logic board cable from the opening for the right clutch.
[* black] Remove the top case
.