Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #5

Edição por Luke

Edição aprovada de Luke

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Floppy Drive
[* black] Using a T-8 torx driver, remove the two floppy drive screws.
[* black] Using a small flat-blade screwdriver, pry up the cable end of the floppy drive and slide the drive to the left.
[* black] Slide the drive forward slightly and lift it partway out of the unit.
[* black] Disconnect the floppy drive cable from ''the motherboard'' and remove the drive.
[* black] If you are replacing the floppy drive or floppy drive cable, release the locking tabs and disconnect the cable from the drive.