Alterações no passo nº 5
Edição por Wraithvenge —
Edição aprovada por Wraithvenge
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Now that we got the slide off the receiver, we'll be getting to the receiver later. |
|---|---|
| + | [* black] Now that we got the slide off the receiver, we'll work on the slide first and be getting to the receiver later. |
| [* black] Pull the recoil spring out towards the rear. | |
| - | [* |
| + | [* red] Make sure barrel link is flat against the barrel and remove it out the front of the slide. |
| [* icon_note] At this point we have taken down the weapon to whats called "Field Stripped". If you just needed to do a quick clean, replace the barrel, or recoil spring/guide rod this is all you need. For deep cleaning after shooting we'll keep going. |