Pular para o conteúdo principal

Alterações no passo #1

Edição por Sydney Hostelley

Edição aprovada por Sydney Hostelley

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the two 4 mm torx screws (4 mm) on the top silver strip and unscrew them with a Torx 4T4 screwdriver.
[* orange] Locate the 4.5 mm torx screw (4.5 mm) above the gold bar and unscrew with a Torx 6T6 screwdriver.
[* red] Locate the two 4 mm torx screws (4 mm) on the top silver strip and unscrew them with a Torx 4T4 screwdriver.
[* orange] Locate the 4.5 mm torx screw (4.5 mm) above the gold bar and unscrew with a Torx 6T6 screwdriver.
[* yellow] Grab the edges of the gold strip with gripped tweezers to remove. The gold and silver metal will come off together.