Pular para o conteúdo principal

Alterações no passo #1

Edição por Sydney Hostelley

Edição aprovada por Sydney Hostelley

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the two screws (4 mm) on the top silver strip and unscrew them with a T4Torx 4 screwdriver.
[* orange] Locate the screw (4.5 mm) above the gold bar and unscrew with a T6Torx 6 screwdriver.
[* red] Locate the two screws (4 mm) on the top silver strip and unscrew them with a T4Torx 4 screwdriver.
[* orange] Locate the screw (4.5 mm) above the gold bar and unscrew with a T6Torx 6 screwdriver.
[* yellow] Grab the edges of the gold strip with gripped tweezers to remove. The gold and silver metal will come off together.