Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #12

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] If necessary, use a spudger to pry up the left edge of the logic board to separate the solidified thermal paste from the heat sink.
[* icon_note] If any resistance is felt when prying up on the logic board, we recommend softening the thermal paste by heating the board with a blowhair dryer or a heat gun before prying further.
[* icon_note] If any resistance is felt when prying up on the logic board, we recommend softening the thermal paste by heating the board with a blowhair dryer or a heat gun before prying further.